Hey there all year round golfer! 

Congratulations...

You're one of the minority that don't pack up their clubs over the winter right?

And you're looking for golf balls that will perform well in cold conditions uh?

Maybe because...

  1. The winter is coming and you want to be prepared with the best equipment available.
  2. You have had terrible experiences using golf balls that were just not suitable for the winter. This is not a mistake that you will make again!

Or

3. Someone has mentioned how much of an impact just using the right golf balls will have on your game in the cold conditions.

There are countless scenarios that could land you in this position. 

But, one thing is for certain, there is a notable difference in golf ball performance in different weather conditions. 

The layers that make up these balls are designed to be sensitive to different conditions.

In A Hurry?

We understand that this is the case for most people.

You might just want to order the balls and get straight to it right? .

With that in mind, we went a little further. In an additional elimination process, we sought to cut our list from 5 down to just one.

And, we chose the Callaway Golf ERC Soft Triple Track Golf Balls.

This was mainly because of the better performance of these balls in cold conditions in comparison to the other balls.

Added to this, these are highly durable golf balls that don't get scuffed up too easily.

The contraction of balls due to the cold weather makes them somewhat prone to cuts and scratches. This is a weakness that you need to cover off with your selection. 

Lets go! You'll find a more detailed review below.

Our Test Winner After 40 + Hours Of Research:

Callaway Golf ERC Soft Triple Track Golf Balls

Our Honest Star Rating

Why is it the BEST?

  • It is ideal for cold weather.
  • The ball is very durable
  • Lines help with alignment especially for putting
  • There is much less drag in flight
97%
Our Score

25

RESEARCHED SOURCES

185

REVIEWS CONSIDERED

40 +

HOURS RESEARCHING

16

PRODUCTS COMPARED

Our top 5 Best Golf Balls In Cold Weather

We started off with searching the web to find golf balls that are advertised by manufacturers as being suitable for cold weather.

Once we gathered a list of these balls we then considered how other golfers who have already experienced them feel. This meant digging through the web to find reviews. We would also speak to golfers in person to hear their thought about them.

The process is one of elimination. As always the final step is the actual testing of the products that have impressed so far.

It is at this stage that we were able to cut the list to just 5 top products that would deliver the best performance for the need that we have.

There are other factors that we also take into account. These will be covered in more detail in our buyer’s guide.

1. Callaway Golf ERC Soft Triple Track Golf Balls - TOP PICK

Callaway Golf ERC Soft Triple Track Golf Balls

Our Honest Star Rating

The Callaway Golf ERC Soft Triple Track Golf Ball is the longest golf ball designed by Callaway; long, in this case, refers to how far the ball goes when struck.

The ball is eponymously named after the founder of Callaway Golf, Ely Reeves Callaway who was a visionary and an innovator in golf.

This naming suggests that this ball is a hallmark product of the company.

The balls come supplied in a pack containing a dozen balls. The balls have a thick red line sandwiched between two thinner blue lines; the company refers to these as Triple Track Technology.

These lines serve as a way to improve alignment. A picture of the ball shown on the website depicts the larger graphene-infused dual-core of the ball. The outer part of the ball is composed of a hybrid of Ionomer and Urethane. 

The multi-material composition of the ball enables it to be fast without compromising its soft feel and high spin. 

A typical dozen pack weighs about 1.4 pounds. There is a choice of two colours when buying these balls: white and hi-vis yellow.

We have also reviewed the Best Golf Ball For 100 mph Swing Speed, so check them out as well.

Pros

  • It is ideal for cold weather.
  • The ball is very durable
  • They are well designed for aerodynamics
  • They are ergonomically designed
  • Lines help with alignment especially for putting
  • There is much less drag in flight
  • You will realise better ball spin
  • Ideal for chipping and putting

Cons

  • Lines on the ball can be distracting for some golfers

2. Titleist NXT Tour Golf Balls

Titleist NXT Tour Golf Balls

Our Honest Star Rating

The Titleist NXT tour golf ball is a ball purposely made for the best distance off the tee.

We’ve found that the ball gets you low long game spin.

This is always a good indicator for identifying a pure distance ball. The low spin ensures that all the initial kinetic energy from being struck is seamlessly transferred to the ball’s core.

The material the ball is made of lends itself to impeccable shot control on the green. Where you intend this ball to stop is usually where it ends up on the green(no excessive rolling).

The ball contains very minimal branding on its surface which leaves room for personalisation.

The ball is marketed as having excellent durability. If this is taken as gospel, this indicates that the ball can hold up in adverse conditions; this is a feature that would be greatly appreciated when the mercury drops.  

The design of the ball incorporates deeper dimple depths that help to lower the ball trajectory. The balls are supplied as a pack of 12.

Check out our review of the Best Golf Balls For Money for our top picks.

Pros:

  • There is an amazing feel on impact
  • Durability is greater than average
  • Incredible softness which does not compromise the strike distance
  • Great value for money
  • They deliver regardless of golfers’ skill level

Cons:

  • They feel harder than you expect when you put them

3. Titleist DT TruSoft Golf Balls

Titleist DT TruSoft Golf Balls

Our Honest Star Rating

The Titleist DT TruSoft Golf Ball is the ball with the softest compression manufactured by Titleist.

The soft compression does not compromise how long the ball can go.

The ball has a 3 layer construction: Trutouch core, Truflex cover and Trusoft flight. The Trutouch core is large and of a low compression which is features that when combined deliver low spin and further distance.

The Truflex cover is patented by Titleist and is touted to provide incredibly soft feel on the green coupled with a short game spin. The aerodynamics of the dimples have been redesigned to produce a better flight.

The 376 tetrahedral dimple also adds to the design by being more responsive to the putter.

The balls are supplied in a dozen pack. In the big package, the balls come in three separate packs each containing 4 balls.

This feature helps to track usage and assess the longevity of balls.  There is a dual choice of colours; the classic white or the visibility-enhancing yellow.

Before you leave, why not check out our Best Golf Balls For The Price guide - and see what our top picks are.

Pros:

  • The ball performs well on the green; control and stopping time
  • The ball provides a consistent flight time
  • It is arguably the best performing ball in its price range
  • There is amazing flight speed

Cons:

  • The white variant is not as visible as we would have liked

4. TaylorMade TP5X

TaylorMade TP5X

Our Honest Star Rating

This ball is comprised of a 5 layer construction. This 5 layer construction mimics 2 balls in 1 feel.

The balls have a  hard urethane cover which combines distance with faster speeds, higher trajectories and less spin.

The ball has a Tri-Fast core which allows more speed and distance thereby reducing the spin.

The 3-layer core feature ensures maximum energy transfer which is necessary to maintain high speed on full shots.

The mixture of an ultra-soft cast urethane & a semi-rigid inner cover creates maximum interaction between the cover & the grooves of the club leading to an exceptional spin performance with full wedge shots & pinpoint control from around the green.

The balls come in a big pack containing a dozen balls. Once opened, there are 4 packs each with three balls.

The white colour of the ball seems to be very vibrant.

Be sure to check out our list of the Best Value Golf Balls for more great items like this.

Pros:

  • They are ideal for all sorts of club types
  • An impressive amount of spin on the short game
  • Maintains a strong trajectory 
  • They perform considerably well on the sand

Cons:

  • The soft outer layer which makes it less damage resistant

5. Oncore Golf The ELIXR PGA Tour Soft White Golf Balls

Oncore Golf The ELIXR PGA Tour Soft White Golf Balls

Our Honest Star Rating

The Elixr is the most advanced ball from Oncore.

The core is made from polybutadiene rubber core, a metal-infused ionomer mantle and a cast urethane cover.

The polybutadiene core is responsible for the incredible velocity. The core composition translates to a ball that can achieve the maximum distance for all club types.

The metal-infused mantle imbues the ball with a perimeter weighting that results in a boring trajectory in high wind weather conditions.

The low driver spin and optimal launch angle provide extreme distance and control off the tee.

The composition of the core also enables it to deliver straight shots. The ball, in general, has a good feel. Pricewise, these are on the premium side.

The improvements and superior construction do justify the price. The balls come supplied as a big pack of 12.

Make sure you also check out our guide to the Best Golf Balls For Distance.

Pros:

  • The ball delivers the highest initial velocity permitted by the USGA (99.84% of the allowable limit).
  • Ideal for a range of  intermediate to professional players
  • The ball is durable; many users claim there was no mark on the ball after a full round
  • It is highly recommended by seasoned professionals
  • Especially good for a player needing a boost in distance

Cons:

  • Not as responsive on the green as we would have liked

Best Golf Balls In Cold Weather Buyer’s Guide

Now that we have considered all of our recommended products on our list, let us look at the buyer’s guide.

Our buyer’s guide is written to help those who just want to know more information about the products that we have discussed. We have covered the guide in the golf ball category as a whole.

You will derive a lot of value from it. There are questions that most of us have had at one point or another. These are some of the questions that we are going to tackle.

Where golf ball should be in my stance

As far as golfing technique is concerned stance is one of the things that is taught right from the beginning. A good stance can be one of the differences between the execution of a perfect shot and struggling with your swing.

One thing that we may not cover as often as we ought to is ball placement. No matter how good your stance is, if the ball is not placed in the right position you will not get the results that you are after.

Ball placement should always be reverse-engineered. You want to start by considering what you want to get from your shot before deciding where you want the ball to be placed.

To simplify this let us consider it from the distance and trajectory point of view. If you are going for distance you want the golf ball to be slightly on the inside of your leading leg.

You also want to make sure that the ball is not too close to your feet. This allows you to have the room for a clean swing.

If you are looking to deliver trajectory to your shot, you want the ball to be either central or closer to your trailing leg. In this case, you also want to have the ball slightly closer to your feet.  

Where to hit golf ball with irons

Another way to see the results that you want with your shots is by focusing on the point of impact with the ball. This is where the clubhead strikes the ball. Interestingly, the point of impact determines the direction of the ball each time.

This is also where you determine whether the golf ball will rise, go flat or remain grounded. It is not as simple as I have made it seem. There are other factors, such as the velocity of the clubhead, as well as its loft angle that will also have an impact.

To get the ball to rise, you want to make contact with it on the lower part of it. The speed at which the club strikes the ball will ensure that the club slide underneath the ball.

The ball will rise right away.

This will have less of a need for input from the loft angle. That being said, not all clubs will execute this. For instance, you will not be able to get much lift with a putter.

When you want to get a lift, go for the middle to lower end of the golf ball. If you want to get the distance you want the ball to be struck in the middle.

Why spin golf ball

We have mentioned ball spin on various occasions. You may now be wondering what is all of this?

We will explain. Ball spin presents itself in two way. It is either side spin or backspin. 

The spins are self-explanatory. The backspin of the ball is what causes the ball to spin backwards while in flight. What this means is that when the ball lands on the ground it start to roll back.

It is a great technique for getting the ball to stop without rolling too far. Another thing that backspin can do for you is to pull the ball back if the ball has landed beyond the hole.

Sidespin is usually viewed as being undesirable for long shots. When there is sidespin the ball tends to veer away from the direction that you want it to go. This is a phenomenon that occurs in other sports as well. When you strike the ball off the centre to either the left or the right side of it, it will swing in the direction that is off it.

Why am I hooking golf ball

Golf ball hooking is common among beginners. More experienced golfers will hook a ball every now and again. This is when the ball flies in a direction that you did not intend for it to go.

Hooking occurs as a result of sidespin. The most common cause of this is not striking the ball in the right place. There are many things that can explain this. To being to diagnose it, you can start by tracking your swing pattern. Getting the swing pattern wrong will often result in mishitting the ball.

Everything becomes easier to see if you slow it down. This is a good way to start your diagnosis. Slow down your swing and see if you are moving in the right way. Track the line in which your club is moving towards the ball. If this is as it should be, you can check the next thing.

Consider your clubface. At what angle is the face making contact with the golf ball? If you do not want to get any spin on the ball. The clubface should strike the ball directly in line with the direction in which you want the ball to travel.

Most sidespin is generated in the follow-through of your shot. This is when your golf club changes direction, moving across the surface of the ball as you hit it. The ball will begin to turn in the direction in which it is spun. Consider your shot beyond the point of impact. Look at how your club comes out at the end of your shot.

If the face of the club is moving or no longer facing the same direction that it was before, chances are that this is what is causing the hooking. Slow down you shot again, and work through the shot.

The most basic cause of sidespin is just having the wrong grip on the club handle. You can diagnose this by being more deliberate about how you hold the club. Get back to the basic and get this part right. You will often find that getting the small things right will go a long way in influencing the rest of your game. You want to make sure that there is a clear V formed in your grip when holding the club.

When to mark a golf ball

Marking a golf ball is a personal matter. There are all sorts of reasons that one could mark their balls. The one thing that is common is that it is done for the purpose of making the ball distinctive. You can mark a ball or draw something on it.

This is a technique that you can use to make sure you can recognise balls based on their characteristics. If you have a ball that is doing particularly well on the putting shots.

You can mark it with this in mind. It will ensure that you use that ball in the areas of the game that it is delivering the best results. By the same token, if you have a ball that is no longer performing as well as it should. It can be retired. Distance is another area of the game that marking the ball can help.

If you are storing multiple balls from multiple brands in the same bag, you can mark them. Golf balls can lose their logo to wear and tear. This would obviously become confusing over time. Keeping your marker handy will save you this grief. The only thing to consider is that the marks will also rub off over time. You may want to do this once in a while.

Another form of ball marking is related to ball positioning. This is commonly done when you are on the green looking to play a putting shot. The marking, in this case, would be done in two way. The first instance would be to mark the spot that you are picking the ball up from. You could place a coin where you are picking the ball up from.

The reasons for picking up a ball could include, needing to give it a good wiping, putting a line on the ball to assist you with putting alignment or to make way for another player’s shot.

How golf ball is made

Golf balls have changed over time. You will find that there are more intricate details that go into them nowadays in comparison to what would have happened years ago. Most golf balls have an inner core and an outer layer at the very minimum. Each one of these components is designed to fulfil a specific purpose.

The two main materials that go into any golf balls are rubber and plastic. The core of the ball is made out of solid rubber. This is where the speed of the ball is generated from. The outer part of the ball is made out of plastic mixed with rubber. It is used mainly between surlyn and or ionomer. The rubber blank is inserted into a heat treating machine. This is where it is shaped into a sphere that will be inserted into the plastic compound cover.

A dimple cover is placed over the top of the rubber. This is made out of molten plastic. Once the ball is out it is then smoothened. The seams that are naturally formed as the plastic cover is inserted over the core. The final step of the manufacturing process is the painting of the ball. They are then brandished with the company’s logo. 

This process can be divided into 5 steps.

  1. The centre formation using heat treatment and compression.
  2. Injection and compression moulding into preset templates.
  3. Compression moulding.
  4. Polishing and painting.
  5. The branding and packaging.

Final Words

We have considered all of our top picks in some detail. There all have their merits, as well as some demerit. Both of these have been described in detail. You are encouraged to take some time to read each product review before you make up your mind.

There are minor details that would be considered to be somewhat subjective. It will be up to you to make sure that you choose this based on your own preferences.

Durability may become even more significant in cold weather conditions. This is something that you should bear in mind when considering your top pick. For those who are struggling for which ball to settle on, you can always go with any of our top picks.

To make it even easier, you can go with our top pick.

Where cold weather is concerned, you are advised to ensure that you do not depend completely on the ball. There are other aspects that you should also consider. Get the right gloves, clubs and shoes to go with the new balls.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top